Week 12

4/22/19
Today we started to add the claw because we really need to catch up on challenges since this robot took up our time since we had to rebuild 4 times now. praying the claw goes smoothly so we can just finish this thing.

4/26/19
So after messing with the claw for 2 classes we finally got the robot's claw to work and actually functions. Next class we are going to have to do the tetrahedron challenge if we want any chance of finishing every challenge.

Week 11

4/22/19
After we got our wheels put on we realized it didn't sound pretty, but with the 4 v5 motors that. thing. flies. No doubt the fastest robot in the room, but can still use much improvement when it comes to the gears grinding and things not tightened.


4/24/19
We are now messing with the coding trying to make the robot do stupid/cool/useless things like say things on its screen and controller screen for no reason... we were bored.

Week 10

4/15/19
Our 2 motors seem to be having a hard time moving the wheels and we don't know why but we have a few ideas as to why. It's either that the gears aren't tight enough, there's not enough torque in the motors, or that the gears are not secure enough and need extra reinforcements.


4/17/19
We figured out that the problem with our robot is that the motor didn't have enough torque to move all the gears and the wheels. We decided to add 2 extra motors so that each wheel gets its own motor.
                                                                                                   

Week 9

4/78/19-
Last class we never finished putting on the gears so we are getting that done today. After we get that done we plan on attaching it to the the base and seeing if it works.... Praying they actually spin this time.



4/12/19-
Despite what was said last week, the loose gears are causing problems and not all the gears are rotating. We are hopping that  it's just a case of them not being supported properly and we are planning to attach their axle to the frame for more stability.   
                                                              

Week 8

4/1/19
Today we worked on the new base for our robot. We are using metal pieces that is 25 units long in order to accommodate all the gears we need. We are just gathering all the pieces today and figuring out how we are going to put them on.



4/5/19
Now that we have all the pieces we need, we started to put on the gears. We're having trouble with tightening them but we figured we will trouble shoot that when it gives us a real problem. Our goal is to have the fastest robot in the room.